Daniel
Carpet cleaning has always been one
of the daunting tasks for homeowners, irrespective of the way people handle the
work. However, it is more challenging to extract hidden dirt from the carpet
than dealing with fresh stains and soils. When it comes to carpet
cleaning, you can follow the tips mentioned below for removing
mud from the carpet.
1. Using dish washing liquid
Remove all the moderate-sized mud
clumps from the carpet is essential, but you should wear gloves to maintain the
cleanliness of your hands. Going further, you have to mix baking soda with salt
and sprinkle the powder on the mud stain. Allow the mixture to stay for a
couple of hours and let it soak the moisture from the area. Finally, you need
to vacuum the powder. Besides this, you can mix one tablespoon of dishwashing
liquid in two cups of warm water and allow it to saturate the stained area on
the carpet before deleting the stain with the help of a clean cloth or sponge.
Do not forget to blot the excess liquid.
2. Deeply-embedded stains
While dealing with deeply-embedded
stains in the carpet, the thumb rule is to eliminate the stains immediately. If
you allow the stain to dry up on the carpet, carpet cleaning Bayswater is tougher than you think. Firstly, you should absorb the
spill with a clean cloth and paper towel and spread baking soda over the
stained area. Allow the powder to sit for some time before cleaning it
effectively. Finally, you have to vacuum the soda from the spot.
3. Using a carpet cleaner containing
vinegar
If you do not want to use chemicals
for cleaning the carpet, you can rely on the home-based carpet cleaning agents.
All you need is prepare a mixture containing requisite quantities of baking
soda, white wine, warm water, and vinegar. Once you mix the ingredients in a
spray bottle, you should shake the bottle to make the mixture uniform.
Once the solution is ready, you can
sprat it over dirt and mud that is deep inside, especially in those areas that
are rather filthy. After applying the solution on the stained area, you have to
let it stay for three to five minutes to penetrate the dirt on the carpet. Due
to the acidic content of vinegar, it is highly useful for clearing the stains.
Use a sponge, clean cloth, or paper towel to scrub the area properly, which
allows the dirt to go away from the carpet and rinse it with warm water.
4. Using home-made soap and carpet
cleaner
If the dirt on your carpet does not
want to go, using home-made soap and a water-based cleaning solution can help.
To prepare this solution, you have to mix liquid soap, which is reasonably mild
and warm water in the spray bottle, and shake it properly. Usually, a
dish-washing liquid can suffice the purpose. You need to apply this solution
and rub the dirt from the carpet with a sponge, clean cloth, paper towel, and a
scrubbing brush. Rinse the area with warm water to complete the process.
Using alcohol
You need to carry out a spot test on the area of
hidden dirt to check the result. If there is no reaction on the carpet, such as
discolouration, you have to blot the area with alcohol and rinse the area
before allowing it to dry correctly.
